原裝burkert 6281EV A/B電磁閥

產品型號： 6281EV

所屬分類：burkert電磁閥

更新日期：2025-05-27

簡要描述：原裝burkert 6281EV A/B電磁閥The 6281 valve is a servo-assisted solenoid valve of the S.EV series. A minimum differential pressure is always required for the proper function of the valve.

聯系我們 在線咨詢

原裝burkert 6281EV A/B電磁閥The 6281 valve is a servo-assisted solenoid valve of the S.EV series. A minimum differential pressure is always required for the proper function of the valve.原裝burkert 6281EV A/B電磁閥 Various diaphragm material combinations and methods of operation are available depending on the application. The standard brass housing satisfi es all European drinking water requirements. Dezincifi cationresistant brass is available for other markets. The housing offering is rounded out by a stainless steel version. The solenoid coils are moulded with a chemically resistant epoxy. For reduced energy requirement, all coils can be delivered with electronic power reduction. The valve can be equipped with manual override for easy maintenance and commissioning. 

特點：

1. 伺服輔助膜片的直徑可達DN50
2. 防震，擰線圈系統
3. 阻尼設計，*關閉
4. 模制外殼具有高表面質量
5. 服務型手動優先
6. 防爆版本

參數：

Orifi ce DN 13 - 50 mm
Body material Brass acc. to DIN EN 50930-6
(Stainless steel dezincifi cation resistant on request)
Inner part of valve Stainless steel, Brass, Plastic (PPS)
Seal material NBR, EPDM, FKM
Media
 NBR
 EPDM
 FKM

Neutral fl uids, e.g. compressed air, water
Oil and fat-free fl uids, hot water, aceton, aqueous alkali solution
Hot air, per-solution
Ambient temperature max. +55 °C
Media temperature
 NBR
 EPDM
 FKM
-10° to +80°C
-30° to +90°C (with epoxy coil to +100°C)
 0° to +90°C (with epoxy coil to +120°C)

Voltages 024/DC, 024/50-60, 230/50-60
Voltage tolerance ±10 %
Duty cycle 100% continuous rating
Electrical connection Tag connector acc. to DIN EN 175301-803 Form A
(previously DIN 43650) for cable plug Type 2508 (see Ordering
chart for accessory, p. 5)
Protection class IP 65 with cable plug
Installation As required, preferably with actuator upright
Response times2) 0,1 - 4 seconds (depending on orifi ce and differential pressure)
Coil isolation class Polyamide class B
Epoxy class H